News

Laser Cut Case

A simple laser cut case for the Open.Theremin.UNO. When I was at the FabLab Lucern a few days ago I made this vertical stand that just holds the arduino and the sield. The case has openings for the two antennas, the audio jack, the CV jack and the USB and power plug of the Arduino. To press the little button on the shield I use a 5mm LED where I cut the legs and stick it through the hole in the front plate :-) The design files are on Thingiverse.com - Thing 180790.

Ein paar Worte auf Deutsch

Laut Statistik sprechen 55% der Besucher der Open.Theremin Website Deutsch. So dachte ich ist es doch mal an der Zeit ein paar Worte auf Deutsch zu schreiben. Hallo und herzlich Willkommen. GaudiLabs, das Labor für Dinge die Spass machen ist in Luzern in der Schweiz zuhause. Die Inspiration für das Theremin Projekt habe ich in der Schweizerischen Gesellschaft für Mechatronische Kunst (SGMK) bekommen in der experimentierfreudige Musiker neue Sythis und Instrumente bauen und Technikbegeisterte sich Austauschen. Nach einigen Jahren Entwicklung ist nun das Arduino kompatible Open.Theremin.UNO entstanden das mir sehr Freude macht und noch viel Potential zur Weiterentwicklung hat. Und neu hier gleich noch eine Deutsche Anleitung. Wo kann man das Theremin kaufen? Im neuen "Store für kleine Auflagen", gibt auch ein schönes Weihnachtsgeschenk oder natürlich zum selber bauen, alles ist quelloffen und unter freier Lizenz. Viel Spass und ich freue mich auch über Mails auf Deutsch.

Gold Batch PCBs

A wonderful batch of circuit boards arrived today. The pads are gold covered and the new art graphics on the back looks realy beatiful. Looking forward to assemble and test these baords.

New Small Batch Store

The first boards of the new batch are produced and work perfectly well. The boards are now available in the new "Small Batch Store" with pay-pal order button. All Open.Theremin.UNO documents (layout, schematics, bill of materials) are up to date with the newest version 1.2. And I have plenty of new ideas (MIDI, PD Patch) and I am happy about all your help, contributions and feed backs.

 

New Software Release

Uploded new Version 1.2 of the Arduino.UNO software for the Open.Theremin.UNO. Spent quite some time cleaning up the code, refining timings, reducing noise at low volume levels. This version should work for all Open.Theremin.UNOs and  improve overall performance. Other modifications are:

- Using externaly generated 31250 Hz Interrupt for WAVE generator (free one timer).
- Prepared code for CV and UART.
- Added many hopefully useful comments.

Download on GitHub here:

https://github.com/GaudiLabs/OpenThereminUNO

Subcategories

  • General

    General questions about the Joomla! CMS